Barrel Adapter Assembly – FS

$96.00

Barrel Adapter Assembly – FS

The War Lock™ is designed to interlock with the Barrel Adapter Assembly – FS. Each barrel system can be customized to the individual choice of the shooter. Switch between barrels and select for any of these:

  • Different rifle or pistol calibers (All NFA rules apply)
  • Varying twist rates
  • Longer or shorter lengths (All NFA rules apply)
  • Diverse options in finish or fluting
  • Rapid choice of muzzle device or suppressors (All NFA rules apply)

Take a moment to realize the true capability of a Modular AR-15 platform. Create individual barrel systems for every caliber or load without spending all your money. Be prepared to shoot any ammunition that is available, instead of getting caught short in a panic buy.

NOTE: Our products are made to order! Due to the launch popularity of our flagship product, please allow up to 30 days for your order to be delivered.

In stock (can be backordered)

Description

Barrel Adapter Assembly – FS

Barrel Adapter Assembly – FS. War Lock™ compatible barrels will need the Barrel Adapter Assembly – FS to connect with the receiver. It becomes an integral member of the system. Once installed, it should never need to be removed. It’s the affordable solution for multiple caliber barrel builds.

Manufactured from the same high quality billet steel as the complete War Lock™ Multiple Caliber System, the Barrel Adapter Assembly – FS is the “barrel half” of the system. It is engineered and built to be durable and last for decades to come.

Our “Small Free Float Adapter” is designed to accommodate clamp on free float rails.  The knurled section of the free float tube/rail must be able to fit our 1.360″ knurled outside diameter.  All of our small free float rails and adapters are interchangeable.

**Compatible with many off the shelf free float rail systems.  Picture of Midwest Industries rail is for illustration purposes.  Midwest Industries rail is not included in this kit.**

 

The Barrel Adapter Assembly – FS is designed to work with the majority of commercially available free float rail systems, gas blocks and front sight assemblies. Our goal is to create our products without any proprietary roadblocks; giving you the freedom to shop around for the best components and pricing to match your individual builds.

Organize your barrel assemblies in new ways with smaller storage requirements. Transporting your AR becomes more manageable in separate, modular receiver and barrel components. One typical hard gun case can store a receiver group and two or three barrel systems.

Cleaning is also less painful and aggravating since you have direct access to the chamber area of your barrels. Tired of using special tools or devices to clean and inspect the chamber? We were too. Separate the barrel system from the receiver and that headache disappears forever.

Safety is always a valid concern with any firearm. The War Lock™ is an evolution in safety. One subtle feature that many overlook, is the capability to separate the barrel system from the receiver group. By storing the receiver and barrels separate, the possibility of unintended discharge is almost eliminated. Secure the firing controls in a different location from the barrel (chamber), and the ammunition.

Unlock the potential in your AR platform. Shoot over 90 calibers without buying another firearm. Spend more of your money on the ammunition and accessories to shoot more often. Learn which calibers and loads you like by trying them out for yourself. Join the communities and groups of shooters working together to advance our knowledge of ballistics and technology.

The Barrel Adapter Assembly – FS includes one Barrel Adapter Assembly – FS. Barrel Adapter Assembly – FS are available for separate purchase.

The War Lock™ Barrel Adapter Assembly – FS allows for user or gunsmith installation of the War Lock™ Barrel Adapter Assembly – FS to one AR-15 barrel. Once installed to the barrel, the barrel system is modularly adapted to other War Lock™-compatible receiver assemblies. Barrel changes are made rapidly; without the need for additional tools. See our line of factory assembled barrel assemblies and receivers for “out of the box” and hassle-free modular shooting choices.

The War Lock™ Barrel Adapter Assembly – FS is machined from one piece of high quality, billet steel to ensure the longest possible service life. We inspect our components and test them to assure reliability, durability and resistance to corrosion.

The Barrel Adapter Assembly – FS is manufactured in the U.S.A. Frontier Tactical™ is veteran owned and operated in the U.S.A.

Special Notice!

Any changes made to your AR-15 require your knowledge, understanding and compliance with BATFE regulations and local/State/Federal laws. It is the purchaser/owner’s legal responsibility to comply with these laws/regulations.

Specifically, the creation of a Short Barreled Rifle (SBR), Short Barreled Shotguns (SBS), suppressed barrels, or Any Other Weapon (AOW) requires compliance with the National Firearms Act of 1934 (NFA). All NFA rules apply to these modifications. Do not assume anything. Do not break the law.

Frontier Tactical™ LLC and its employees and agents are not liable and will be held harmless from and against all liabilities, legal fees, imprisonment, damages, losses, costs, and other expenses resulting from the illegal use by any purchaser, installer or operator of a firearm with our products.

Additional information

Weight 1.0 lbs
Dimensions 3 x 3 x 3 in

Specifications & Notices

Fits – Mil-spec AR-15 barrels. Finish – Matte Black.

Weight: 0.49 lbs. (7.8 oz.) Length: 1.5” Width: 2.50”

The Barrel Adapter Assembly – FS includes one Barrel Adapter Assembly – FS. Additional Barrel Adapter Assembly – FS’s are available for separate purchase.

The War Lock™ Barrel Adapter Assembly – FS allows for user or gunsmith installation of the Barrel Adapter Assembly – FS to one AR-15 barrel. Once installed to the barrel, the barrel system is modularly adapted to other War Lock™-compatible receiver assemblies. Barrel changes are made rapidly; without the need for additional tools. See our line of factory assembled barrel assemblies and receivers for “out of the box” and hassle-free modular shooting choices.

The Barrel Adapter Assembly – FS is machined from one piece of high quality, billet steel to ensure the longest possible service life. We inspect our components and test them to assure reliability, durability and resistance to corrosion.

The Barrel Adapter Assembly – FS is manufactured in the U.S.A. Frontier Tactical™ is veteran owned and operated in the U.S.A.

Special Notice!

Any changes made to your AR-15 require your knowledge, understanding and compliance with BATFE regulations and local/State/Federal laws. It is the purchaser/owner’s legal responsibility to comply with these laws/regulations.

Specifically, the creation of a Short Barreled Rifle (SBR), Short Barreled Shotguns (SBS), suppressed barrels, or Any Other Weapon (AOW) requires compliance with the National Firearms Act of 1934 (NFA). All NFA rules apply to these modifications. Do not assume anything. Do not break the law.

Frontier Tactical™ LLC and its employees and agents are not liable and will be held harmless from and against all liabilities, legal fees, imprisonment, damages, losses, costs, and other expenses resulting from the illegal use by any purchaser, installer or operator of a firearm with our products.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.